Using wii machine description
Only using first contiguous memory regionTotal memory = 22MB; using 64kB for hash table (at c1680000)
Linux version 2.6.24-isobel-wii (albert@g.nothing.org) (gcc version 3.3.2) #1 PREEMPT Fri Jul 4 21:33:58 CEST 2008
console [udbg0] enabled
Entering add_active_range(0, 0, 5784) 0 entries of 256 used
Top of RAM: 0x1698000, Total RAM: 0x1698000
Memory hole size: 0MB
Zone PFN ranges:
  DMA             0 ->     5784
  Normal       5784 ->     5784
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->     5784
On node 0 totalpages: 5784
  DMA zone: 45 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 5739 pages, LIFO batch:0
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 5739
Kernel command line: root=/dev/rvlsda2 video=gcnfb:tv=NTSC force_keyboard_port=4 placeholder_for_additional_kernel_options_targetted_at_hexedit_lovers
flipper-pic: controller at 0x0c003000 mapped to 0xfdfff000
PID hash table entries: 128 (order: 7, 512 bytes)
time_init: decrementer frequency = 60.750000 MHz
time_init: processor frequency   = 729.000000 MHz
clocksource: timebase mult[41d7f79] shift[22] registered
clockevent: decrementer mult[f8d] shift[16] cpu[0]
Console: colour dummy device 80x25
console handover: boot [udbg0] -> real [tty0]
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 19372k/23136k available (3120k kernel code, 3764k reserved, 156k data, 147k bss, 160k init)
Calibrating delay loop... 121.34 BogoMIPS (lpj=242688)
Mount-cache hash table entries: 512
net_namespace: 64 bytes
NET: Registered protocol family 16
exi: Nintendo GameCube/Wii EXternal Interface (EXI) driver - version 4.0i
exi: about to add [exi0:1] id=0xfffff308 Wii Mask ROM/RTC/SRAM/UART
exi: add completed
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
NET: Registered protocol family 2
Time: timebase clocksource has been installed.
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 2, 20480 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
starlet-ipc: Nintendo Wii starlet IPC driver - version 0.2i
starlet-malloc: Nintendo Wii starlet malloc library - version 0.1i
starlet-malloc: ioh at 0x133e0000, mapped to 0xc2000000, size 128k
starlet-es: Nintendo Wii starlet ES driver - version 0.1i
starlet-es: launching IOS35
gcn-rsw: Nintendo GameCube/Wii Reset SWitch (RSW) driver - version 1.0i
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
gcn-vifb: Nintendo GameCube/Wii Video Interface (VI) driver - version 1.0i
gcn-vifb: snapshoting video regs...
gcn-vifb: ... done!
gcn-vifb: framebuffer at 0x01698000, mapped to 0xc2080000, size 1440k
gcn-vifb: mode is 640x480x16, linelength=1280, pages=2
gcn-vifb: scrolling: pan,  yres_virtual=1152
Console: switching to colour frame buffer device 80x30
gcn-vifb: fb0: gcn-vifb frame buffer device
Generic RTC Driver v1.07
Macintosh non-volatile memory driver v1.1
gcn-sd: MMC/SD card block driver for the Nintendo GameCube/Wii - version 4.1i
rvl-mem2: Nintendo Wii MEM2 block driver - version 0.1-isobel
rvl-stsd: Block driver for the Nintendo Wii SD front slot - version 0.1i
rvl-stsd: descr "SDC  ", size 501248k, block 512b, serial 1030015d
 rvlsda: rvlsda1 rvlsda2
RAMDISK driver initialized: 2 RAM disks of 4096K size 1024 blocksize
loop: module loaded
usbcore: registered new interface driver asix
Driver 'sd' needs updating - please use bus_type methods
rvl-sthcd: USB Host Controller driver for the Nintendo Wii - version 0.4i
rvl-sthcd starlet-hcd.4: Nintendo Wii USB Host Controller
rvl-sthcd starlet-hcd.4: new USB bus registered, assigned bus number 1
rvl-sthcd: sthcd_oh_rescan: 057E.0305 inserted
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 15 ports detected
rvl-sthcd: sthcd_oh_rescan: 0B95.7720 inserted
rvl-sthcd: sthcd_oh_rescan: 04D9.1400 inserted
Initializing USB Mass Storage driver...
usb 1-1: new full speed USB device using rvl-sthcd and address 2
rvl-sthcd: new address 2
rvl-sthcd: sthcd_endpoint_disable: (pep c10ae260, sn 2, urb c10505c0) urb in transit!
usb 1-1: configuration #1 chosen from 1 choice
usb 1-2: new full speed USB device using rvl-sthcd and address 3
rvl-sthcd: new address 3
rvl-sthcd: sthcd_endpoint_disable: (pep c1184d80, sn 11, urb c1050440) urb in transit!
usb 1-2: configuration #1 chosen from 1 choice
eth0: register 'asix' at usb-rvl-sthcd-2, ASIX AX88772 USB 2.0 Ethernet, 00:1b:7a:**:**:**
usb 1-3: new full speed USB device using rvl-sthcd and address 4
rvl-sthcd: new address 4
rvl-sthcd: sthcd_endpoint_disable: (pep c1184c60, sn 60, urb c1050240) urb in transit!
usb 1-3: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
mice: PS/2 mouse device common for all mice
rtc-gcn: Nintendo GameCube/Wii RTC/SRAM driver - version 1.0i
rtc-gcn exi0:1: rtc core: registered rtc-gcn as rtc0
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
input: HID 04d9:1400 as /class/input/input0
input: USB HID v1.10 Keyboard [HID 04d9:1400] on usb-rvl-sthcd-3
rvl-sthcd: sthcd_pep_print: req 68: io_buf=c2000120, io_buf_len=0, io_xfer_offset=0
rvl-sthcd: sthcd_giveback_urb: urb c1175e60: status = -32
input: HID 04d9:1400 as /class/input/input1
input: USB HID v1.10 Mouse [HID 04d9:1400] on usb-rvl-sthcd-3
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
gcn-si: Nintendo GameCube/Wii Serial Interface (SI) driver - version 1.0i
input: standard pad as /class/input/input2
gcn-si: port 1: standard pad
gcn-si: port 2: not present
gcn-si: port 3: not present
gcn-si: port 4: not present
Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20 19:16:42 2007 UTC).
gcn-ai: Nintendo GameCube/Wii Audio Interface (AI) driver - version 1.0i
ALSA device list:
  #0: Nintendo GameCube Audio Interface
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Bluetooth: L2CAP ver 2.9
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
rtc-gcn exi0:1: setting system clock to 2008-07-20 22:43:21 UTC (1216593801)
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 160k init
Adding 53112k swap on /dev/rvl-mem2.  Priority:-1 extents:1 across:53112k
EXT3 FS on rvlsda2, internal journal
eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1